Understanding printer messages
58 Too many flash options installed
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
58 Too many trays attached
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
61 Remove defective hard disk
•
Press
until
Continue appears, and then press
•
Install a different hard disk before performing any operations that require a hard disk.
62 Disk full
•
Press
until
Continue appears, and then press
•
Delete fonts, macros, and other data stored on the hard disk.
•
Install a larger hard disk.
63 Unformatted disk
•
Press
until
Continue appears, and then press
•
Format the disk.
If the error message remains, the hard disk may be defective and require replacing.
80 Scheduled maintenance <x>
Contact Customer Support, and report the message. The printer needs to have scheduled maintenance done.
to clear the message and continue printing.
to clear the message and continue processing.
to clear the message and continue printing.
125