Understanding printer messages
Load <src> with <x>
•
Load the paper tray or other source with the correct paper type and size.
Note: To learn how to load the specified paper source, press
press
.
•
Cancel the current job.
Load staples <x>
•
Replace the specified staple cartridge in the finisher.
Note: To learn how to replace the specified staple cartridge, press
for the specified staple cartridge appears, and then press
•
Press
repeatedly until
•
Cancel the print job.
Menus are disabled
The printer menus are disabled. The printer settings cannot be changed from the control panel. Contact your system
support person for help.
Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job.
Network/Network <x>
The printer is connected to the network.
Network indicates that the printer is using the standard network port built into the printer system board. Network
<x> indicates that an internal print server is installed inside the printer or that the printer is connected to an external
print server.
No held jobs
Wait for the message to clear.
No jobs to cancel
Wait for the message to clear.
No recognized file types
Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the following
supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
Continue appears, and then press
repeatedly until Show Me appears, and then
repeatedly until the Show Me message
.
to clear the message and continue printing.
117