Defective Flash Detected; Unformatted Flash Detected; Standard Network Software Error - Lexmark C935 Series User Manual

Understanding printer messages

51 Defective flash detected

•
Press until Continue appears, and then press
•
Cancel the current print job.
52 Flash full
•
Press until Continue appears, and then press
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

•
Press until Continue appears, and then press
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Serial option <x> error
•
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
•
Press until Continue appears, and then press
• Turn the printer power off and then back on to reset the printer.

54 Standard network software error

•
Press until Continue appears, and then press
• Turn the printer power off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
54 Network <x> software error
•
Press until Continue appears, and then press
•
Turn the printer power off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
to clear the message and continue printing.
to clear the message and continue printing.
to stop the defragment operation and continue printing.
to continue printing.
to continue printing.
to continue printing.
123