Lexmark C935 Series User Manual page 121

Understanding printer messages
Waiting
The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional
data.
•
Press to print the contents of the buffer.
• Cancel the current print job.
31 Missing or defective <color> cartridge
The specified toner cartridge is either missing or not functioning properly.
•
Remove the specified toner cartridge, and then reinstall it.
Note: To learn how to install a toner cartridge, press
.
• Remove the specified toner cartridge, and then install a new one.
32 Replace unsupported <color> cartridge
Remove the specified toner cartridge, and then install a supported one.
Note: To learn how to install a toner cartridge, press
34 Incorrect paper type, check <src>
• Load the appropriate paper or other specialty media in the proper tray.
• Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
•
Cancel the current print job.
34 Incorrect paper size, check <src>
•
Load the appropriate paper or other specialty media in the proper tray.
•
Press until Continue appears, and then press
paper tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
•
Cancel the current print job.
repeatedly until Show Me appears, and then press
repeatedly until Show Me appears, and then press
to clear the message and print the job using a different
121
.