Download Print this page

Lexmark C935 Media Manual

Lexmark c935: supplementary guide
Hide thumbs Also See for C935:

Advertisement

Media guide

The printer supports the following paper and other specialty media sizes. Select custom sizes up to the maximum
specified for the Universal setting.

Paper sizes supported by the printer

Paper size
A3
A4
1
A5
Executive
Folio
JIS B4
JIS B5
Legal
Letter
1
Statement
Tabloid
Universal
7 3/4 Envelope
(Monarch)
1
The printer cannot simultaneously sense A5 and statement paper sizes. From the Size Sensing menu, specify which
size you want the printer to detect. This setting applies to all automatic trays except the multipurpose feeder. The
multipurpose feeder can support both sizes.
2
Measurements apply to simplex (one-sided) printing only. For duplex (two-sided) printing, the minimum size is
140 x 148 mm (5.5 x 5.8 in.) and the maximum size is 297 x 432 mm (11.7 x 17 in.).
Dimensions
520-sheet
trays
(standard or
optional)
297 x 420 mm
(11.7 x 16.5 in.)
210 x 297 mm
(8.3 x 11.7 in.)
148 x 210 mm
(5.8 x 8.3 in.)
184 x 267 mm
X
(7.3 x 10.5 in.)
216 x 330 mm
(8.5 x 13 in.)
257 x 364 mm
(10.1 x 14.3 in.)
182 x 257 mm
(7.2 x 10.1 in.)
216 x 356 mm
(8.5 x 14 in.)
216 x 279 mm
(8.5 x 11 in.)
140 x 216 mm
(5.5 x 8.5 in.)
279 x 432 mm
(11 x 17 in.)
100 x 148 mm
X
(3.9 x 5.8 in.) up to
305 x 483 mm
2
(11.7 x 19 in.)
98 x 191 mm
X
(3.9 x 7.5 in.)
High capacity
Multipurpose
feeder
feeder
X
X
X
X
X
X
X
X
X
X
Media guide
Page 1 of 3
Duplex unit
X
X
X

Advertisement

loading

Summary of Contents for Lexmark C935

  • Page 1: Media Guide

    The printer cannot simultaneously sense A5 and statement paper sizes. From the Size Sensing menu, specify which size you want the printer to detect. This setting applies to all automatic trays except the multipurpose feeder. The multipurpose feeder can support both sizes.
  • Page 2: Storing Paper

    The following hints can help you avoid jams: • Use only recommended paper or specialty media. For more information, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications. • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Page 3 Make sure the guides in the trays are properly positioned, and are not pressing too tightly against the paper. • Make sure all paper sizes and paper types are set correctly in the control panel menu. • Make sure all printer cables are attached correctly. For more information, see the setup documentation. Media guide Page 3 of 3...