Checking The Status Of Supplies; Checking The Status Of Supplies From The Control Panel; Printing A Menu Settings Page; Checking The Status Of Supplies From A Network Computer - Lexmark C935 Series User Manual

Maintaining the printer

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the control panel

1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press until View supplies appears, and then press
The status of each supply appears.

Printing a menu settings page

Print a menu settings page to review the status of the supplies.
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press repeatedly until
4
Press repeatedly until
Printing Menu Settings appears. After the menu settings page prints, Ready appears.

Checking the status of supplies from a network computer

Note: The computer must be connected to the same network as the printer.
1
Open a Web browser.
2
In the address bar, type the IP address of the network printer (for example,192.264.263.17).
3
Press Enter.
The Device Status Page appears. A summary of supply levels is displayed.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place
where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Ordering toner cartridges

When 88 Cyan toner low, 88 Magenta toner low, 88 Yellow toner low, or 88 Black toner
low appears, order a new cartridge.
until Status / Supplies appears, and then press
.
Reports appears, and then press
Menu Settings Page appears, and then press
.
.
.
130
.