Power Saver; Programming System Code Do Not Power Off; Menus Are Disabled; No Held Jobs - Lexmark C530 series, C532 series, C534 series Menus And Messages Manual

Menus are disabled

The printer menus are disabled. The printer settings cannot be changed from the control panel. Contact your system
support person for help.
Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job.

No held jobs

The printer memory contains no held jobs. Wait for the message to clear, or press

No jobs to cancel

The printer memory contains no jobs. Wait for the message to clear.

Power Saver

The printer is saving power while it waits for the next print job. Try one of the following methods:
•
Send a job to print.
•
Press to warm the printer to normal operating temperature. Afterwards, Ready appears.
Printer locked, enter PIN to unlock
The control panel is locked. Enter the correct PIN to unlock it.
Printing
The printer is currently printing jobs. Wait for the message to clear.
Programming disk DO NOT POWER OFF
The printer is storing data on the disk. Wait for the message to clear.
Warning: Do not turn the printer off while Programming disk appears on the display.
Programming flash DO NOT POWER OFF
The printer is storing resources, such as fonts or macros, in flash memory. Wait for the message to clear.
Warning: Do not turn the printer off while Programming flash appears on the display.

Programming system code DO NOT POWER OFF

The printer is programming new system code. Wait for the message to clear.
Warning: Do not turn the printer off while Programming system code appears on the display.
Ready
The printer is ready to receive print jobs, and you can change menu settings from the control panel.
Remote Management Active DO NOT POWER OFF
The printer settings are being configured. Wait for the message to clear.
Warning: Do not turn the printer power off while Remote Management Active appears on the display.
46
.