Led Indications - Planet WGSW-20160HP User Manual

■ Console Port
The console port is a DB9, RS-232 male serial port connector. It is an interface for connecting a terminal directly. Through
the console port, it provides rich diagnostic information includes IP Address setting, factory reset, port management, link
status and system setting. Users can use the attached RS-232 cable in the package and connect to the console port on the
device. After the connection, users an run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix, Winterm
and so on) to enter the startup screen of the device.

2.1.2 LED Indications

The front panel LEDs indicates instant status of power and system status, fan status, port links / PoE In-Use, data activity; helps
monitor and troubleshoot when needed.
WGSW-20160HP LED Indication
■ System
LED Color
PWR Green
SYS Green
■ Alert
LED Color
FAN1 Green
FAN2 Green
 Per 10/100/1000Mbps port with PoE interfaces (Port-1 to Port-16)
LED Color
LNK/ACT Green
PoE In-Use Orange
■ Per 10/100/1000Base-T Combo Port (Port -17 to Port-20)
LED Color
1000
Green
LNK/ACT
10 / 100
Orange
LNK / ACT
Figure 2-2 shows the LED indications of the Managed Switch.
Figure 2-2: WGSW-20160HP LED at Front Panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Lights to indicate that the FAN1 failure.
Lights to indicate that the FAN2 failure.
To indicate the link through that port is successfully established at
Lights:
10/100/1000Mbps.
To indicate that the Switch is actively sending or receiving data over that port.
Blink:
To indicate the port is providing 56V DC in-line power.
Lights:
To indicate the connected device is not a PoE Powered Device (PD).
Off:
To indicate the link through that port is successfully established at 1000Mbps.
Lights:
To indicate that the Switch is actively sending or receiving data over that port.
Blink:
To indicate the link through that port is successfully established at 10Mbps or
Lights:
100Mbps.
To indicate that the Switch is actively sending or receiving data over that port.
Blink:
User's Manual of WGSW-20160HP
Function
Function
Function
Function
32