Qos Dscp Classification Mode; Qos Dscp Classification Map - Planet WGSW-20160HP User Manual

QoS DSCP Classification Mode

Description:
Set or show DSCP ingress classification mode.
If port DSCP classification is 'selected', DSCP will be classified based on QoS class and DP level only for DSCP value
with classification mode 'enabled'. DSCP may be translated DSCP if translation is enabled for the port.
Syntax:
QoS DSCP Classification Mode [<dscp_list>] [enable|disable]
Parameters:
<dscp_list>: DSCP (0-63) list or 'all'
: Enable DSCP ingress classification
enable
: Disable DSCP ingress classification
disable
(default: Show DSCP classification mode)
Default Setting:
disable

QoS DSCP Classification MAP

Description:
Set or show DSCP ingress classification table.
This table is used to map DSCP from QoS class and DP level. The DSCP which needs to be classified depends on port
DSCP classification and DSCP classification mode. Incoming frame DSCP may be translated beforeusing the value for
classification.
Syntax:
QoS DSCP Classification Map [<class_list>] [<dpl_list>] [<dscp>]
Parameters:
<class_list>: QoS class list or 'all', default: All QoS classes (0-7)
<dpl_list> : DP level list or 'all', default: All DP levels (0-1)
: Mapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
<dscp>
Default Setting:
disable
User's Manual of WGSW-20160HP
484