Planet WGSW-20160HP User Manual page 321

The page includes the following fields:
Object
 System PoE Admin
Mode
 PoE Temperature
Protection
 PoE Management
Mode
 Power Supply Budget
[W]
 Temperature
Threshold
 PoE Usage Threshold
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
For WGSW-20160HP, the total PoE power reservation from Port-1~16 is up to 230 Watts.
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is
to provide information about the maximum power required by the PD during operation. Class 0 is the default for PDs. However,
to improve power management at the PSE, the PD may opt to provide a signature for Class 1 to 4.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
Description
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
Allows user enable or disable PoE Temperature Protection.
There are five modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Classification mode: System reserves PoE power to PD according to PoE class
level.
Allocation mode: allows user to assign PoE power to per port.
Consumption mode: System offers PoE power accordint to PD real power
consumption.
Priority mode: System offers PoE power according to per port priority setting
when power consumption has been over total power budget.
The default PoE management mode is "Consumption mode".
Set limit value of the total PoE port provided power to the PDs.
For WGSW-20160HP, the available max. Value is 230.
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget automatically.
Allows setting how much PoE power budget could be limited.
321
User's Manual of WGSW-20160HP