Security Switch Access Ipv6 Add; Security Switch Access Delete - Planet WGSW-20160HP User Manual

Security Switch Access IPv6 Add

Description:
Add access management IPv6 entry, default: Add all supported protocols.
Syntax:
Security Switch Access Ipv6 Add <access_id> <start_ipv6_addr> <end_ipv6_addr> [web] [snmp] [telnet]
Parameters:
<access_id>
<start_ipv6_addr>: Start IPv6 address.
<end_ipv6_addr> : End IPv6 address.
web
snmp
: Indicates that the host can access the switch from TELNET/SSH
telnet

Security Switch Access Delete

Description:
Delete access management entry.
Syntax:
Security Switch Access Delete <access_id>
Parameters:
<access_id>: entry index (1-16)
: entry index (1-16)
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a
colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous
zeros; but it can only appear once. It also used a following
example,'::192.1.2.34'.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a
colon separates each field (:). For example,'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous
zeros; but it can only appear once. It also used a following
example,'::192.1.2.34'.
: Indicates that the host can access the switch from HTTP/HTTPS
: Indicates that the host can access the switch from SNMP
User's Manual of WGSW-20160HP
392
legally IPv4 address. For
legally IPv4 address. For