Port Excessive
Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [<port_list>] [discard|restart]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Discard frame after 16 collisions
discard
: Restart backoff algorithm after 16 collisions
restart
(default: Show mode)
Default Setting:
Discard
Port Statistics
Description:
Show port statistics.
Syntax:
Port Statistics [<port_list>] [<command>] [up|down]
Parameters:
<port_list>: Port list or 'all', default: All ports
<command> : The command parameter takes the following values:
: Clear port statistics
clear
: Show packet statistics
packets
: Show byte statistics
bytes
: Show error statistics
errors
: Show discard statistics
discards
: Show filtered statistics
filtered
: Show priority statistics
0..7
(default: Show all port statistics)
: Show ports, which are up
up
: Show ports, which are down
down
User's Manual of WGSW-20160HP
369