Ip Subnet-Based Vlan - Planet WGSW-20160HP User Manual

4.6.13 IP Subnet-based VLAN

The IP subnet-based VLAN enties can be configured here. This Page allows for adding, updating and deleting IP subnet-based
VLAN entries and assigning the entries to different ports. This Page shows only static entries. The IP-based VLAN screen in
Figure 4-6-19 appears.
The Page includes the following fields:
Object
 Delete
 VCE ID
 IP Address
 Mask Length
 VLAN ID
 Port Members
 Adding a New IP
subnet-based VLAN
Figure 4-6-19: Protocol to Group Mapping Table Page Screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Indicates the index of the entry. It is user configurable. It's value ranges from
0-256. If a VCE ID is 0, application will auto-generate the VCE ID for that entry.
Deletion and lookup of IP subnet-based VLAN are based on VCE ID.
Indicates the IP address.
Indicates the network mask length.
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
A row of check boxes for each port is displayed for each IP subnet-based VLAN
entry. To include a port in a IP subnet-based VLAN, check the box. To remove or
exclude the port from the IP subnet-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Click "Add New Entry" to add a new IP subnet-based VLAN entry. An empty row
is added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled when you click on "Save". The
"Delete: button can be used to undo the addition of new IP subnet-based VLANs.
User's Manual of WGSW-20160HP
132