Planet WGSW-20160HP User Manual page 37
16-port gigabit 802.3at poe+ 4g tp/sfp combo managed switch
Hide thumbs
Also See for WGSW-20160HP:
- User manual (563 pages) ,
- Command manual (433 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Approved PLANET SFP Transceivers
PLANET Managed Switch supports both Single mode and Multi-mode SFP transceiver. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
MGB-GT
MGB-SX
MGB-LX
MGB-L50
MGB-L70
MGB-L120
MGB-LA10
MGB-LA20
MGB-LB20
MGB-LA40
MGB-LB40
Fast Ethernet SFP Transceiver Modules
MFB-FX
MFB-F20
MFB-F60
MFB-FA20
MFB-FB20
1.
2.
Before connect the other Managed Switches, workstation or Media Converter.
In the installation steps below, this Manual use Gigabit SFP transceiver as the example. However,
the steps for Fast Ethernet SFP transceiver are similar.
1.
Make sure both side of the SFP transceiver are with the same media type, for example: 1000Base-SX to 1000Base-SX,
1000Bas-LX to 1000Base-LX.
2.
Check the fiber-optic cable type match the SFP transceiver model.
To connect to 1000Base-SX SFP transceiver, use the Multi-mode fiber cable- with one side must be male duplex LC
connector type.
To connect to 1000Base-LX SFP transceiver, use the Single-mode fiber cable-with one side must be male duplex LC
connector type.
SFP-Port 1000Base-T Module
SFP-Port 1000Base-SX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module -50KM
SFP-Port 1000Base-LX mini-GBIC module -70KM
SFP-Port 1000Base-LX mini-GBIC module -120KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -10KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -20KM
SFP-Port 1000Base-LX (WDM,TX:1550nm) -20KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -40KM
SFP-Port 1000Base-LX (WDM,TX:1550nm) -40KM
SFP-Port 100Base-FX Transceiver -2KM
SFP-Port 100Base-FX Transceiver -20KM
SFP-Port 100Base-FX Transceiver -60KM
SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) -20KM
SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) -20KM
It recommends using PLANET SFP on the Managed Switch. If you insert a SFP transceiver that
is not supported, the Managed Switch will not recognize it.
Port 17 to Port 20 are shared SFP slot that support Gigabit & Fast Ethernet SFP transceiver.
User's Manual of WGSW-20160HP
37
Advertisement
Table of Contents
