Verifying Printer Setup - Lexmark 133 User Manual

1
Power cord socket
2 Ethernet port
Note: The Ethernet port is a feature on network models only.
3 USB port

Verifying printer setup

Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up
correctly by printing the following:
Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed
•
options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed
correctly. Remove the option and install it again.
Network setup page—If your printer is a network model and is attached to a network, print a network setup
•
page to verify the network connection. This page also provides important information that aids network printing
configuration.
Additional printer setup
33