Attaching Cables - Lexmark 133 User Manual

Note: Once the printer software and any options are installed, it may be necessary to manually add the options in
the printer driver to make them available for print jobs. For more information, see "Updating available options in the
printer driver" on page 35.

Attaching cables

1
Connect the printer to a computer or a network.
For a local connection, use a USB cable.
•
For a network connection, use an Ethernet cable.
•
Notes:
For fax connections, see "Initial fax setup" on page 88.
•
Make sure the software is installed before turning the printer on. For more information, see the Setup
•
Guide.
2
Connect the power cord to the printer first and then to a wall outlet.
Additional printer setup
32