Supported Flash Drives And File Types; Printing Photos From A Pictbridge-Enabled Digital Camera - Lexmark 133 User Manual

Supported flash drives and file types

Flash drive
Lexar JumpDrive 2.0
•
Pro (256 MB, 512 MB, or 1G sizes) or
•
SanDisk Cruzer Mini (256 MB, 512 MB, or 1G sizes);
•
Notes:
Hi-Speed USB flash drives must support the Full-speed standard. Devices supporting only USB
•
Low-speed capabilities are not supported.
USB flash drives must support the FAT (File Allocation Tables) system. Devices formatted with NTFS
•
(New Technology File System) or any other file system are not supported.
Printing photos from a PictBridge-enabled digital
camera
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and
print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with your camera.
2
Insert the other end of the USB cable into the USB port on the front of the printer.
Notes:
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. See the camera
•
documentation for more information.
If the PictBridge connection is successful, then a confirmation message appears on the printer display.
•
3
Follow the instructions on the camera to select and print photos.
Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the
camera.
Printing
71
File type
Documents:
.pdf
•
.pcx
•
.xps
•
.dcx
•
Images:
.gif
•
.JPEG
•
.bmp
•
.TIFF
•
.png
•