6.3.
Basic wheel alignment
In the event of an accident or any other damage occurring to the
suspension every component, including those not directly
affected, should be measured, checked for cracks and, where
necessary, replaced (e.g. steering, wishbones, uprights, ball-
joints, centre lock wheel nuts and all fasteners).
The wheel alignment should be carried out using an optical and/or
electronic or mechanical suspension alignment device. The measurement
procedure described in the device operating instructions should be
followed.
Electronic suspension alignment devices can be purchased from the
following company:
Beissbarth GmbH
Hanauer Straße 101
D-80993 München
Telephone: +49-(0)89-14901-0
Telefax: +49-(0)89-14901-285
www.beissbarth.com
87