5.7.
Changing gear
A gear lever force sensor is integrated in the gear knob, which activates
an ignition cut, and therefore a cut in propulsion, when pulled or pushed.
This allows full power up shifts to be made.
Attention: It is absolutely necessary to change gear as quickly as
possible. Shifting gear too slowly can cause an increase in wear or
damage to the dog-ring teeth.
Down shift
Neutral gear
release
Porsche Motorsport recommends that the following points are strictly
adhered to prevent gearbox damage:
Change gear as quickly as possible
Only touch the gear knob when changing gear
Always blip the throttle and use the clutch synchronised when
down shifting (approximately 50° wdkba_w)
Driving direction
Up shift
51