Porsche 2012 911 GT3 CUP Technical Manual page 97

6.4.2.3. Camber
6.4.3. Summary of suspension geometry adjustment components
Lower wishbone
+ spacer shims [mm]
The rear lower-wishbone can be adjusted as follows:
Wishbone
Camber shims
 Camber shims: The wishbone length can be adjusted using
different spacers, a 1 mm adjustment in length equates to a
camber change of approximately 12'
 The bearing points of the rear control arms (wheel side)must be
left in the position in which they are delivered (back position) and
must not be rotated
Front axle Part number
10 996.341.543.95
7 996.341.543.93
3 996.341.543.92
2 996.341.543.91
1 996.341.543.90
0,8 996.341.543.98
0,6 996.341.543.97
0,3 996.341.543.96
Fixed bearing
Rear axle Part number
10 996.341.543.95
7 996.341.543.93
3 996.341.543.92
2 996.341.543.91
1 996.341.543.90
0,8 996.341.543.98
0,6 996.341.543.97
0,3 996.341.543.96
94