Working On The Gearbox - Porsche 2012 911 GT3 CUP Technical Manual

5.10. Working on the gearbox

5.10.1. Gearbox special tools
The dismantling, assembly and maintenance of the gearbox is described
in this section. This gives you the possibility to replace damaged or worn
parts. In the event of more comprehensive damage, which necessitates
the replacement of gearbox housings, we strongly recommend that this is
undertaken by Porsche Motorsport. Complex measurement and
adjustment, which could not be included in these instructions, are
necessary to guarantee that the gearbox works perfectly.
Stop plate ring and pinion gear
Angle bracket for stop plate
Angle bracket for stop plate
Plate locking torque measurement
Arbour press
Arbour press
Spacer bolt
Centring bolt clutch
Spacer ring
Locking tool input shaft
Arrester for shift rod
Shift knob
Auxiliary tool reverse gear
Auxiliary tool gear housing
Locking tool input shaft
996.450.320.90
996.450.325.90
996.450.326.90
996.450.322.90
996.450.323.90
996.450.324.90
996.450.329.90
996.450.335.90
996.450.332.90
000.721.928.20
996.450.315.9A
996.450.313.9A
996.450.311.9A
996.450.310.9A
000.721.925.30
57