Table of Contents
Advertisement
Figure 6-27 Standard Page
NOTE:
The BL c-Class tab is available only on HP Integrity server blades.
Table 6-25
lists the fields, buttons, and descriptions.
Table 6-25 Standard Page Description
Fields and Buttons
MAC Address
DHCP Status
iLO 2 MP Host Name
IP Address
Subnet Mask
Gateway Address
Link State
Submit
Cancel
Domain Name Server
The Domain Name Server (DNS) page
settings, domain name, and up to three DNS servers manually or automatically through DHCP.
It further enables a DDNS update through the primary DNS server as long as it is authoritative
for the zone. You must have iLO configuration access right to use this feature.
118
Using iLO 2 MP
The 12 digit (hexadecimal) MAC address.
Enable or Disable.
The host name set here is displayed at the iLO 2 MP Command interface prompt.
The iLO 2 MP IP address. If DHCP is being used, the IP address is automatically
supplied.
The subnet mask for the iLO 2 MP IP network. If DHCP is being used, the subnet mask
is automatically supplied.
The IP address of the network gateway. If DHCP is being used, the gateway IP address
is automatically supplied.
Auto Negotiate or 10 BaseT option.
Submits the information.
Cancels the action.
(Figure
Description
6-28) enables you to configure the DNS server
Advertisement
Table of Contents
