He (Help): Display Help For The Menu Or Command In The Mp Main Menu; Exit): Exit The Ilo 2 Mp; Command Menu; Command Menu Commands - HP ntegrity iLO 2 MP Operation Manual

HE (Help): Display help for the menu or command in the MP Main Menu

HE displays the MP hardware and firmware version identity, and the date and time of firmware
generation. If executed from the MP Main Menu, HE displays general information about the iLO
2 MP, and those commands available in the MP Main Menu. If executed in command mode, HE
displays a list of Command menu commands available. It also displays detailed help information
in response to a topic or command at the help prompt.
X (Exit): Exit the iLO 2 MP
X exits you from the MP Main Menu. If the terminal is the local serial port, the login prompt
appears. For all other types of terminals, you are disconnected from the iLO 2 MP.

Command Menu

The Command menu provides you with a set of standard command line interface commands
that help monitor and manage the server.
Table 6-5 lists the Command Menu commands.
Table 6-5 Command Menu Commands
Command
BP
BLADE
CA
DATE
DC
DF
DI
DNS
FW
HE
ID
IT
LC
LDAP
LM
LOC
LS
PC
PM
PR
PS
RB
RS
Resets the BMC passwords
Displays blade parameters
NOTE:
This command is available only on a server blade.
Configures asynchronous local serial port
Displays the current date
Resets all parameters to default configuration
Displays field replaceable unit (FRU) information
Disconnects the LAN console
Sets the DNS configuration
This command is only available to authorized HP service personnel
Displays help for the menu or command
Displays or modifies system information
Modifies the iLO 2 MP inactivity timeouts
Displays the LAN configuration
Displays the LDAP configuration
License management
Displays and configures locator LED
Displays the LAN status
Remote power control
Remote power mode control
Configures the power restore policy
Displays the power management module status
Resets the BMC
Resets the system through the RST signal
Description
Text User Interface 63