Starting A System Console Session; Determining The Session Termination Character Sequence For The System Console; Exiting The System Console Session And Returning To Sm Clp; Entering The Mp Main Menu Interface From Sm Clp - HP ntegrity iLO 2 MP Operation Manual

Starting a System Console Session

To start a system console session, enter the following command:
</>hpiLO->start /system1/consoles1/textredirectsap1

Determining the Session Termination Character Sequence for the System Console

To determine the session termination character sequence for the system console, enter the
following command:
</> hpiLO-> show -d properties=SessionTerminateSequence
/system1/consoles1/testredirectsap1
status 0
status_tag=COMMAND COMPLETED
/system1/consoles1/testredirectsap1
Properties
SessionTerminateSequence=Esc (

Exiting the System Console Session and Returning to SM CLP

To exit the system console session and return to SM CLP, enter Esc + ( at the system text
console.

Entering the MP Main Menu Interface From SM CLP

To enter the MP Main Menu from SM CLP, enter the following command: </>hpiLO->start
/map1/textredirectsap1

Exiting the MP Main Menu Session and Returning to SM CLP

To exit the MP Main Menu interface and return to the SM CLP session, enter SMCLP

Firmware Revision Display and Upgrade

This section describes how to view firmware revisions in the system.
Each installed firmware in the system known to MP (MP FW, BMC FW, EFI FW, System FW,
and so on) is represented by a swid target.
• /map1/swinstallsvc1 represents iLO 2 MP's ability to install firmware.
• /map1/swinventory1 represents a collection of all swids installed in the system.

SM CLP Firmware Targets

This section describes targets, target properties, and supported verbs necessary to implement
the firmware model in SM CLP.

Target: map1/swinstallsvc1

SoftwareInstallationService provides the ability to transfer images into a managed element from
a source location, local or remote (such as the ability to upgrade firmware).
Table 6-36 shows swinstallsvc1 target properties.
Table 6-36 swinstallsvc1 Properties
Property Name
Description
Verbs
134 Using iLO 2 MP
Description
Provides a textual description of the object.
Access and Values
Read-only
The value is set to firmware
installation service.