Table of Contents
Advertisement
IMPORTANT:
the server boots to the EFI Shell. Start a console session using the console serial port (RS-232)
method to view console output prior to booting to the EFI Shell, or to access the iLO 2 MP.
See"Configuring the iLO 2 MP LAN Using the Console Serial Port" (page
To access the graphic console with VGA, follow these steps:
1.
Perform preparation tasks.
2.
Connect the cables. See
a.
Connect the monitor VGA cable to the appropriate VGA port.
b.
Connect the keyboard USB cable to the appropriate USB port.
c.
Connect the mouse USB cable to the appropriate USB port.
3.
Power on the server. The EFI Shell prompt appears.
52
Accessing the Host Console
The server console output does not display on the console device screen until
Figure 2-3
and
Figure 2-4 (page 30)
39).
for specific port information.
Advertisement
Table of Contents
