Showing Content With People+Content™ Ip - Polycom HDX Series User Manual

User's Guide for Polycom HDX Systems and the Polycom Touch Control
Showing Content with People+Content™ IP
16
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system or Polycom Touch Control.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
• The People+Content IP application must be installed on a computer.
To install People+Content IP on a computer:
On a computer with a Microsoft® Windows XP, Windows Vista, or
1
Windows 7 operating system, open a web browser and go to
www.polycom.com/ppcip.
Download and install the People+Content IP software.
2
To start showing content:
On the computer, start the Polycom People+Content IP application.
1
Enter the IP address or host name of the Polycom HDX system and the
2
meeting password, if one is set. To view the IP address of the HDX
system, touch
next to HDX System.
On the computer click Connect.
3
Open the content you want to show, and click
4
To stop showing content:
If the People+Content IP toolbar is minimized, maximize it by clicking
1
the icon in the task bar.
Click in People+Content IP.
2
To keep the call secure, content might be automatically stopped when a participant
joins the call.
System from the Home screen and then touch
in People+Content IP.
Polycom, Inc.