Showing Content From A Document Camera, Vcr; Or Dvd Player - Polycom HDX Series User Manual

User's Guide for Polycom HDX Systems and the Polycom Touch Control
Showing Content from a Document Camera, VCR, or DVD Player
20
To annotate the content:
While you are showing content from a USB drive, touch
1
the annotation toolbar.
— Touch to draw red lines on the content.
— Touch to add yellow highlighting to areas of the content.
— Touch to white-out areas of the content.
After you select a tool, touch and drag your finger across the screen to
2
use it. If you are in a call and showing the content, the far sites see your
annotations.
To clear the annotations, touch
3
cleared when you go to another page or touch Stop Content.
Depending on how your system is configured, you might be able to show
different types of information to other sites in a call, such as through a
document camera, VCR, or DVD player.
Before the call begins:
• Make sure the document camera, VCR, or DVD player is connected and
powered on. Refer to the setup sheet that came with your system.
• Position your document or object in the document camera or insert the
videotape or DVD.
To start showing a document, object, videotape, or DVD in a call:
From the Home screen or call screen, touch Show Content.
1
Touch a content source.
2
The icon for the video source moves up slightly on the screen, and the
content is shown to the call participants.
To stop showing a document, object, videotape, or DVD in a call:
>> From the Content screen touch the content source to stop showing it.
The icon for the video source moves down on the screen, and the content
is no longer shown to the call participants.
. The annotations are automatically
to access
Polycom, Inc.