Adjusting For Room Lighting; Allow Room Or Call Monitoring With The Polycom Hdx Web; Interface; Using The Virtual Remote Control - Polycom HDX Series User Manual

User's Guide for Polycom HDX Systems and the Polycom Touch Control

Adjusting for Room Lighting

Allow Room or Call Monitoring with the Polycom HDX Web

Interface

Using the Virtual Remote Control

32
Changing this setting takes effect immediately, even if a call is in progress.
If your system administrator has allowed access to user settings, you can use
the backlight control to adjust the brightness of the video that the main camera
sends to the Polycom HDX system. Adjusting this setting can be helpful when
the room arrangement results in strong light coming from behind the people
in the picture.
Because backlight controls adjust the main camera, these controls do not make
content from a computer or a document camera appear brighter.
To turn backlight compensation on:
From the Home screen touch
1
Touch the HDX System tab.
2
Under Camera, touch Backlight Compensation to enable the option.
3
To enable room and call monitoring:
From the Home screen, touch
1
Touch the HDX System tab.
2
Enable Allow Video Display on Web under Meetings to allow the room
3
or call to be viewed remotely.
During normal operation, the Polycom Touch Control device uses an IP
connection to communicate with the HDX system. If this connection is lost for
more than 2 minutes, you might see error messages on the HDX system
monitor and the Polycom Touch Control screen. You can access a virtual
remote control on the Polycom Touch Control device that allows you to
User Settings.
User Settings.
Polycom, Inc.