Showing Content With People+Content Ip; Showing Content From A Computer Connected Directly To; Realpresence Group Systems - Polycom RealPresence Group Series User Manual

User's Guide for the Polycom RealPresence Group Series and the Polycom Touch Control

Showing Content with People+Content IP

Showing Content from a Computer Connected Directly to

RealPresence Group Systems

Polycom, Inc.
The People+Content IP application allows you to send content from a
computer that is not connected directly to the RealPresence Group system or
the Polycom Touch Control.
For a computer connected directly to the RealPresence Group system, Polycom
recommends using the Send Computer button or Content button instead of
People+Content IP.
To start showing content:
1 On your computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the RealPresence Group system and
the meeting password, if one is set.
To view the IP address of the RealPresence Group system, touch
from the Home screen and then touch
3 On the computer, click Connect.
4 In People+Content IP, open the content you want to show, and click
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2 Click in People+Content IP.
3 Click Disconnect.
To start showing content:
1 From the Home screen or Call screen, touch Show Content.
2 Touch the video source to start showing content. Touch it again to stop
showing content.
next to Group Series System.
.
15