Showing Content; Showing Content With People+Content Tm Ip - Polycom QDX 6000 User Manual

Showing Content

Showing Content with People+Content™ IP
1
2
3
1
2
3
4
© Polycom, Inc.
You may be able to show the following to the far sites:
•
Any information stored on a computer
•
A paper document or object placed on a document camera
•
A videotape or DVD
You can show one type of content and one video source at a time, and you
can switch to a different type of content or video source if you need to.
Participants at other sites can also share content or video sources.
Depending on how your system is configured, you may be able to show
content that is stored on a computer. When you show content from a
computer, the far site can see you and what you see on the computer screen.
When you are sending content, the
monitor. Depending on the configuration of your system, you may also see
the content on your monitor or projector.
People+Content IP allows you to send content from a computer that is not
connected directly to the Polycom QDX 6000 system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16 bits or higher.
To install People+Content IP on a computer:
On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
Navigate to your product page.
Download and install the People+Content IP software.
To start showing content:
On the computer, start the Polycom People+Content IP application.
Enter the IP address or DNS host name of your video conferencing
system and the meeting password, if one is set.
Click Connect.
Open the content you want to show, and do one of the following:
User's Guide for Polycom QDX 6000 Systems
content icon appears on your main
11