Showing Content; Showing Content With People+Content™ Ip - Polycom HDX Series User Manual

User's Guide for Polycom HDX Room Systems

Showing Content

Showing Content with People+Content™ IP
16
You may be able to show the following to the far sites:
• Any information stored on a computer
• A paper document or object placed on a document camera
• A videotape or DVD
You can show one type of content and one people video source at a time, and
you can switch to a different type of content or people video source if you need
to. Participants at other sites can also show content or people video sources.
Depending on how your system is configured, you may be able to show
content that is stored on a computer. When you show content from a
computer, the far site can see you and what you see on the computer screen.
When you are sending content, the
monitor. Depending on the configuration of your system, you may also see the
content on your monitor or projector.
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP uses a
maximum resolution of 1024 x 768.
• The People+Content IP application must be installed on a computer.
To install People+Content IP on a computer:
1. On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
2. Navigate to your product page.
3. Download and install the People+Content IP software.
content icon appears on your main
© Polycom, Inc.