Passwords For Multipoint Calls - Polycom HDX Series User Manual

Passwords for Multipoint Calls

Polycom, Inc.
Place a call to the next site. For more information, refer to
3
on page 3.
Repeat steps 2 and 3 until all sites are connected.
4
To place a multipoint call using a directory group:
From the Home screen touch
1
Touch a group folder in the directory list.
2
Depending on how your system is configured, it attempts to call the group
using a pre-defined list of call types. Contact your system administrator
for more information.
To place a cascaded multipoint call:
Call a group from the directory, or place calls one at a time to several
1
other sites. For more information, refer to
Ask each site to call additional sites.
2
You might be required to enter a meeting password to join a multipoint call.
And you can require that far sites enter a meeting password, to prevent
unauthorized participants from joining multipoint calls hosted by your HDX
system.
• If you need to generate touch tones (DTMF tones), touch Keypad from the call
screen. Then use the keypad number buttons.
• SIP calls do not support meeting passwords. SIP endpoints calling into a
multipoint call protected by a password might not be able to join the call.
To enter a meeting password:
• If a prompt appears on the screen, use the onscreen keyboard to enter the
password.
• If you hear an audio prompt, use the keypad to generate DTMF tones.
To configure a meeting password:
From the Home screen touch
1
Touch the HDX System tab.
2
In the Meeting Password field under Meetings, enter the password.
3
User's Guide for Polycom HDX Systems and the Polycom Touch Control
Search the Directory.
User Settings.
Placing a Call
Placing a Call on page 3.
23