Windows Nt 4.0 - Installing The Pcl 6/5E Printer Driver - Lanier 5222 Operator's Manual

Windows NT 4.0 - Installing the PCL 6/5e Printer Driver

Installing the Printer Driver
Installing Printer Driver
•
If your system uses Windows NT 4.0 and Service Pack 4 is installed, you might not
install the PCL 6/5e printer driver using Auto Run. In this case, use [Add Printer
Wizard] in the [Printers] window to install the printer driver or install Service Pack 5 in
the computer before install the printer driver.
•
Install the driver in accordance with the steps explained in "Installing by Auto Run" on
page 3-1.
•
If you want to share the printer on Windows NT 4.0, you must not install the
printer driver using Auto Run. In this case, cancel Auto Run and install the
printer driver using [Add Printer Wizard] in the [Printers] window.
•
When prompted for Windows NT 4.0 alternate driver location, specify the following
folder in the CD-ROM.
PCL 5e:
\DRIVERS\PCL5E\NT4\(Language)\DISK1\
PCL 6:
\DRIVERS\PCL6\NT4\(Language)\DISK1\
•
When prompted for Windows 95/98 alternate driver location, specify the following
folder in the CD-ROM.
PCL 5e:
\DRIVERS\PCL5E\WIN95_98\(Language)\DISK1\
PCL 6:
\DRIVERS\PCL6\WIN95_98\(Language)\DISK1\
Installing the PCL 6/5e Printer Driver
3 - 5