Operation Panel - Lanier 5222 Operator's Manual

Operation Panel

Operation Panel
This panel display is for installed Facsimile and Printer.
1
2
3
4
5
6
7
8
9
10
1 - 8
1 2
{User Tools} key:
Press to change the default settings and conditions to meet your requirements.
Error Indicator:
Lights up whenever a printer error occurs. A message describing the cause of the error also appears on the panel
display.
Panel Display:
Shows the operation status, error messages, and function menus. Press selection keys to select the function on the
panel display.
Cursor keys
Pres either arrow to move the cursor in the message display
{Energy Saver} key:
Press this key for about 1 second to switch to and from Energy Saver mode.
Operation Switch:
Press this switch to turn the power on (the On indicator lights up). To turn the power off, press this switch again
(the On indicator goes off).
Number keys
Function keys:
Press to change the functions (Copy, Facsimile, Printer) shown on the panel display. To use the printer function,
press the {Printer} key.
Data In Indicator:
Shows if a print job is being sent from the host computer. If the indicator is blinking, a job is being sent. If the
indicator stays on the data is printing.
On Line Indicator:
Stays on while the printer is online.
3 4 5
7 8 9 10
Introduction
6