Panasonic KX-UTG200 Setup Manual page 352

5.9.3 Per Line - SIP Settings
Description
Value Range
Default Value
SIP_403_REG_SUB_RTX
Value Format
Description
Value Range
Default Value
SIP_DUAL_STACK_SDP_MODE
Value Format
Description
Value Range
Default Value
AUTH_INCOMING_INVITE
Value Format
Description
Value Range
Default Value
SIP_RINGIN_TIMER
Value Format
Description
Value Range
352 Administrator Guide
Specifies whether INVITE/SUBSCRIBE will also follow the REGISTER
Failover result.
•
Y/Yes (INVITE/SUBSCRIBE will follow the REGISTER Failover
result.)
•
N/No (INVITE/SUBSCRIBE will not follow the REGISTER Failover
result.)
N
Boolean
Specifies whether or not to send a request when a 403 Forbidden reply
is received from the server in response to an INVITE or SUBSCRIBE.
•
Y/Yes (Send)
•
N/No (Do not send)
N
Integer
Specifies whether to bring IPv4 and IPv6 media separately in SDP.
0–1
–
0 (Use alternate connectivity for dual stack)
–
1 (Use both IPv4 and IPv6 together for dual stack)
0
Boolean
Specifies whether to authenticate the incoming INVITE.
•
Y/Yes (Authenticate incoming INVITE)
•
N/No (Not authenticate incoming INVITE)
N
Integer
Specifies the timer, in seconds, for an incoming call. It would disconnect
the call if the timer expires (0: Disable).
0, 10 - 65535
Document Version 2015-01