Panasonic KX-UTG200 Setup Manual page 290

5.6.1 Call Control Settings
HOLD_RECALL_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
AUTO_ANS_RING_TIM
Value Format
Description
Value Range
Default Value
ONHOOK_TRANSFER_ENABLE
Value Format
Description
Value Range
Default Value
KEY_PAD_TONE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
290 Administrator Guide
Integer
Specifies the duration of the hold recall timer. If set to "0", the function
is disabled.
0–240 (0: Disable)
60
Hold Recall Timer (Page 141)
Integer
Specifies the number of seconds a phone in Auto Answer mode will ring
before a conversation is established automatically when it receives a
call.
0–15
5
Boolean
Specifies whether transfer operations are permitted while on-hook.
•
Y/Yes (Enable On-hook Transfer)
•
N/No (Disable On-hook Transfer)
Y
Integer
Selects whether a tone is heard in response to key presses.
0–3
–
0: high
–
1: middle
–
2: low
–
3: off
3
Key Click Tone (Page 162)
Document Version 2015-01