Panasonic KX-UTG200 Setup Manual page 269
Hide thumbs
Also See for KX-UTG200:
- Administrator's manual (348 pages) ,
- Operating instructions manual (100 pages) ,
- Getting started (17 pages)
Table of Contents
Advertisement
Default Value
STATIC_SUBNET_MASK
Value Format
Description
Value Range
Default Value
STATIC_DEFAULT_GATEWAY
Value Format
Description
Value Range
Default Value
Phone User Interface
Reference
Web User Interface Reference
STATIC_DNS1_SVR
Value Format
Description
Value Range
Document Version 2015-01
Empty string
String
Specifies the subnet mask for the unit.
Note
•
This setting is available only when "DHCP_ENABLE" is set to
"N".
•
When you specify this parameter, you must specify
"STATIC_IP_ADDR" and "STATIC_DEFAULT_GATEWAY"
together in a configuration file.
Max. 15 characters (IP address in dotted-decimal notation)
Empty string
String
Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
•
This setting is available only when "DHCP_ENABLE" is set to
"N".
•
When you specify this parameter, you must specify
"STATIC_IP_ADDR" and "STATIC_SUBNET_MASK" together in
a configuration file.
Max. 15 characters (IP address in dotted-decimal notation)
Empty string
Configuring the Network Settings of the Unit (Page 29)
Default Gateway (Page 89)
String
Specifies the IP address of the primary DNS server.
Note
•
This setting is available only when "DHCP_ENABLE" is set to
"N".
Max. 15 characters (IP address in dotted-decimal notation)
5.5.1 IP Settings
Administrator Guide
269
Advertisement
Chapters
Table of Contents
