Panasonic KX-UTG200 Setup Manual page 303

Value Range
Default Value
DIAL_TONE2_RPT
Value Format
Description
Value Range
Default Value
DIAL_TONE2_TIMING
Value Format
Description
Value Range
Default Value
BUSY_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
BUSY_TONE_GAIN
Value Format
Description
Value Range
Document Version 2015-01
(-80)–0
0
Boolean
Specifies whether Dial Tone 2 is repeated.
•
Y/Yes (Repeat)
•
N/No (No Repeat)
N
Comma-separated Integer
Specifies the pattern, in milliseconds, of Dial Tone 2 using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,0
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
Tone Frequencies (Page 159)
Integer
Specifies the gain, in decibels, of the busy tone.
(-80)–0
5.6.8 Tone Settings
Administrator Guide 303