Panasonic KX-UTG200 Setup Manual page 274

5.5.3 LLDP-MED Settings
Description
Value Range
Default Value
5.5.3 LLDP-MED Settings
LLDP_TRAFFIC_TO_PC_PORT
Value Format
Description
Value Range
Default Value
LLDP_ASSTID
Value Format
Description
Value Range
Default Value
LLDP_POWER_PRIORITY
Value Format
Description
Value Range
Default Value
274 Administrator Guide
Specifies the DNS2 server IPv6 address for the unit.
Note
•
This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
Max. 39 characters (IPv6 address)
Empty string
Boolean
Specifies whether to forward LLDP packets received from the LAN port
to the PC port.
•
Y/Yes (Forward LLDP received to PC port)
•
N/No (Do not forward LLDP received to PC port)
Y
String
Specifies the asset ID of the phone that is advertised through LLDP for
inventory management.
Max. 32 characters
Empty string
Integer
Specifies the power priority of the phone that is advertised through
LLDP for power management.
0–3
–
0: unknown
–
1: low
–
2: high
–
3: critical
0
Document Version 2015-01