Panasonic KX-UTG200 Setup Manual page 291
Hide thumbs
Also See for KX-UTG200:
- Administrator's manual (348 pages) ,
- Operating instructions manual (100 pages) ,
- Getting started (17 pages)
Table of Contents
Advertisement
ENDCALL_TRANSFER_ENABLE
Value Format
Description
Value Range
Default Value
FOLLOW_SERVER_BELLCORE
Value Format
Description
Value Range
Default Value
BUSY_ON_CALL_END
Value Format
Description
Value Range
Default Value
REORDER_TONE_TIM
Value Format
Description
Value Range
Default Value
DIRECT_TRANSFER_ENABLE
Value Format
Description
Document Version 2015-01
Boolean
Specifies if users can press the end call soft key to complete the
transfer.
•
Y/Yes (Enable End call transfer)
•
N/No (Disable End call transfer)
N
Boolean
Specifies whether to follow server bell core requests.
•
Y/Yes (Follow server bell core request)
•
N/No (Do not follow server bell core request)
Y
Boolean
Specifies whether the unit should play a busy tone when the remote
party ends the call while the call is connected.
•
Y/Yes (Enable busy on call end)
•
N/No (Disable busy on call end)
Y
Integer
Specifies the duration of the reorder tone.
1-30
5
Boolean
Specifies whether to transfer the call directly when the configured line
has a connected call or a call on hold and the selected FB button is idle.
5.6.1 Call Control Settings
Administrator Guide
291
Advertisement
Chapters
Table of Contents
