Panasonic KX-UTG200 Setup Manual page 323

Web User Interface Reference
MIN_DELAY
Value Format
Description
Value Range
Default Value
Web User Interface Reference
NOM_DELAY
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2015-01
Maximum Delay (Page 135)
Integer
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "NOM_DELAY"
–
This value must be less than "MAX_DELAY"
–
"MAX_DELAY" must be greater than "NOM_DELAY"
2
Minimum Delay (Page 135)
Integer
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "MIN_DELAY"
–
This value must be less than "MAX_DELAY"
2
Initial Delay (Page 135)
Boolean
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y/Yes (Enable RTCP)
•
N/No (Disable RTCP)
N
RTCP Enable (Page 134)
5.9.1 Per Line - VoIP
Administrator Guide 323