Panasonic KX-UTG200 Setup Manual page 309

HOLD_ALARM_RPT
Value Format
Description
Value Range
Default Value
HOLD_ALARM_TIMING
Value Format
Description
Value Range
Default Value
CW_TONE1_FRQ
Value Format
Description
Value Range
Default Value
CW_TONE1_GAIN
Value Format
Description
Value Range
Default Value
CW_TONE1_RPT
Value Format
Description
Document Version 2015-01
Boolean
Specifies whether the hold alarm is repeated.
•
Y/Yes (Repeat)
•
N/No (No Repeat)
Y
Comma-separated Integer
Specifies the pattern, in milliseconds, of the hold alarm using up to 10
whole numbers (on 1, off 1, on 2, off 2...) separated by commas.
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
120,14880
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
Integer
Specifies the gain, in decibels, of call waiting tone 1.
(-80)–0
0
Boolean
Specifies whether call waiting tone 1 is repeated.
5.6.8 Tone Settings
Administrator Guide 309