Panasonic KX-UTG200 Setup Manual page 325

Description
Value Range
Default Value
Web User Interface Reference
RFC2543_HOLD_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
MAX_CONNECTION
Value Format
Description
Value Range
Default Value
Web User Interface Reference
VQM_PUBLISH
Value Format
Description
Value Range
Default Value
Document Version 2015-01
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when "DTMF_MODE" is set to
"Y".
96–127
101
Telephone-event Payload Type (Page 136)
Boolean
Specifies whether to enable the RFC 2543 Call Hold feature on this line.
•
Y/Yes (Enable RFC 2543 Call Hold)
•
N/No (Disable RFC 2543 Call Hold)
Note
•
If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•
If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Y
Supports RFC 2543 (c=0.0.0.0) (Page 136)
Integer
Specifies the MAX connections per line.
1–24
4
Max Connection (Page 133)
Boolean
Specifies whether to enable/disable VQM PUBLISH.
•
Y/Yes (Enable VQM publish)
•
N/No (Disable VQM publish)
N
5.9.1 Per Line - VoIP
Administrator Guide 325