FIP-5 Tray 3 Paper Empty (Put %s in %s Bin)
Step
Initial setting
Check the following for evidence of fault.
1
SENSOR NO PAPER replacing condition
SENSOR actuator replacing condition
2
Does the error occur even if the paper is added?
Checking SENSOR NO PAPER
Does SENSOR NO PAPER function normally?
3
Using SENSOR NO PAPER diagnostic tool, check by Digital
Input Test.
Checking PWBA OPTFDR for signal
4
Is P/J83-7PIN <=> P/J83-6 +3.3VDC?
Checking PWBA OPTFDR for signal
5
Is P/J81-15PIN <=> P/J81-23 +3.3VDC?
Checking HARNESS ASSY OPFPLG/HARNESS ASSY
OPFREC/HARNESS ASSY OPFMAIN for continity
6
Check the following for continuity.
J81-15PIN<=>J810-A12PIN<=>J210-B12PIN<=>
J21-12PIN
Checking PWBA OPTFDR for signal
7
Is P/J83-5PIN <=> P/J83-6 +5VDC?
1-26
Check
Remedy
Yes
Replace the parts
Go to step [2]
concerned
With tool
Go to step [3]
End of work
Without tool
Go to step [4]
Replace HBN
Go to step [4]
MCU WITH CPU
Go to step [7]
Go to step [5]
Replace PWBA
Go to step [6]
OPTFDR
Replace HBN
Replace
MCU WITH CPU
HARNESS ASSY
Replace PWBA
which is not
OPTFDR
continuous
Replace SENSOR
Replace PWBA
NO PAPER
OPTFDR
No