Removal
1)
Remove the CASSETTE of the TRAY 2 and 3. (RRP1.1)
2)
Remove the COVER FRONT. (RRP1.1)
3)
Remove the COVER R (PL14.2.3). (RRP1.2)
4)
Remove the COVER L (PL14.2.1). (RRP1.3)
5)
Remove the CHUTE ASSY TURN (PL14.3.7). (RRP1.4)
6)
Remove the COVER CST SLIDE. (RRP1.20)
7)
Remove the HARNESS ASSY FDR2T (grey) (LP14.5.3). (RRP1.5)
8)
Remove the HARNESS ASSY FDR3T (blue) (PL14.5.4). (RRP1.6)
9)
Remove the DRIVE ASSY OPF (PL14.5.5). (RRP1.7)
10) Remove the INDICATOR ASSY (PL14.5.9). (RRP1.8)
11) Remove the BRACKET LOW PAPER (upper and lower 2 pcs). (RRP1.11)
12) Remove the PWBA OPTFDR (PL14.5.1). (RRP1.10)
13) Remove the GUIDE ASSY CASSETTE R (PL14.3.2). (RRP1.11)
14) Remove the GUIDE ASSY CASSETTE L (PL14.3.1). (RRP1.12)
15) Remove the LINK ACTUATOR (PL14.4.6). (RRP1.13)
16) Remove the PICK UP ASSY TR2 (PL14.4.1). (RRP1.14)
17) Remove 2 screws securing the PICK UP ASSY TR3 (PL14.4.1) to the right side of the OPTION
FEEDER frame.
18) Remove 2 claws of the PICK UP ASSY TR3 (PL14.4.1) and tip of the ROLL ASSY TURN (PL14.4.20)
from the 2 slits on the left side of the OPTION FEEDER frame and window.
19) Remove the PICK UP ASSY TR3 (PL14.4.1)
When removing the screws, be careful not to damage the GEAR or SPRING with the
screwdriver. When passing the PICK UP ASSY TR3 (PL14.4.1) through the window of
the OPTION FEEDER frame, be careful not to damage the rubber parts.
Replacement
Replace the components in the reverse order of removal.
When replacing the screws, be careful not to damage the GEAR or SPRING with the
screwdriver. When passing the PICK UP ASSY TR3 (PL14.4.1) through the window of
the OPTION FEEDER frame, be careful not to damage the rubber parts.
Chapter 3 Removal and Replacement Procedures
3-63