Konica Minolta Magicolor 3300 Service Manual page 35

Removal
1) Pull out the cassettes of the TRAY 2 and 3 horizontally all the way to the end of the stroke and extract
them inclining a little upward.
2) Release the 3 claws securing the COVER FRONT (PL14.2.4) to the OPTION FEEDER frame and
remove the cover front.
When removing the lower COVER FRONT (PL14.2.4), release the 3 claws with a
screwdriver or the like.
Replacement
Replace the components in the reverse order of removal.
In replacing the COVER FRONT (PL14.2.4), pay attention to the up-down direction.
Also, engage the flap of the OPTION FEEDER frame with a slit of the COVER FRONT
(PL14.2.4).
Chapter 3 Removal and Replacement Procedures
3-35