Konica Minolta Magicolor 3300 Service Manual page 65

Removal
1) Remove the CASSETTE of the TRAY 2 and 3. (RRP1.1)
2) Remove the COVER FRONT. (RRP1.1)
3) Remove the COVER R (PL14.2.3). (RRP1.2)
4) Remove the COVER L (PL14.2.1). (RRP1.3)
5) Remove the CHUTE ASSY TURN (PL14.3.7). (RRP1.4)
6) Remove the COVER CST SLIDE. (RRP1.20)
7) Remove the HARNESS ASSY FDR2T (grey) (LP14.5.3). (RRP1.5)
8) Remove the HARNESS ASSY FDR3T (blue) (PL14.5.4). (RRP1.6)
9) Remove the DRIVE ASSY OPF (PL14.5.5). (RRP1.7)
10) Remove the INDICATOR ASSY (PL14.5.9). (RRP1.8)
11) Remove the BRACKET LOW PAPER (upper and lower 2 pcs). (RRP1.11)
12) Remove the PWBA OPTFDR (PL14.5.1). (RRP1.10)
13) Remove the GUIDE ASSY CASSETTE R (PL14.3.2). (RRP1.11)
14) Remove the GUIDE ASSY CASSETTE L (PL14.3.1). (RRP1.12)
15) Remove the LINK ACTUATOR (PL14.4.6). (RRP1.13)
16) Remove the PICK UP ASSY TR2 (PL14.4.1). (RRP1.14)
17) Remove the PICK UP ASSY TR3 (PL14.4.1). (RRP1.15)
18) Remove the GEAR IDLER (PL14.5.6).
Replacement
Replace the components in the reverse order of removal.
When replacing, the lager GEAR must face the OPTION FEEDER frame.
Chapter 3 Removal and Replacement Procedures
3-65