How To Operate The Both Sides Adj. Item; Finely Adjust The Side Guide Plates Of The Paper Tray (For Pf-707/Pf-707M/Pf-602M) - Konica Minolta AccurioPress C2070 Daily Maintenance Manual

2.5

How to Operate the Both Sides Adj. Item

2.5 How to Operate the Both Sides Adj. Item
2.5.1 Finely adjust the side guide plates of the paper tray (for PF-707/PF-707m/PF-
602m)
If front and rear side guide plates are not fixed upright, in other words, any gap is found between top and
bottom edges of them, feeding trouble may be caused. In this case, follow the adjustment procedure below
to properly fix the top and bottom edges of the side guide plates.
1
Withdraw the tray to be adjusted.
% Trays cannot be withdrawn when the machine is not powered. Be sure to turn the sub power
switch ON.
2
Fully widen the side guide plates and rear guide plate.
% Turn the two side guide fixing knobs of the side guide plates counterclockwise to loosen them.
% Fully widen the side guide plates and rear guide plate while pressing the lock release lever of the
side guide plate and rear guide plate.
NOTICE
When moving the side guide plates, be sure to hold both the lock release lever of the front one and
the handle of the rear one. If moved only with the front side guide plate, the side guide plates may
not be fixed in position.
3
Load paper of the size to be adjusted.
% Load about 100 sheets of paper.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
2
2-7