Konica Minolta Magicolor 3300 Service Manual page 43
Hide thumbs
Also See for Magicolor 3300:
- Service manual (518 pages) ,
- User manual (198 pages) ,
- Installation manual (39 pages)
Table of Contents
Advertisement
Removal
1)
Remove the CASSETTE of the TRAY 2 and 3. (RRP1.1)
2)
Remove the COVER FRONT. (RRP1.1)
3)
Remove the COVER R (PL14.2.3). (RRP1.2)
4)
Remove the HARNESS ASSY FDR2T (grey) (PL14.5.3).
Remove the connector (J82) of the HARNESS ASSY FDR2T (grey) holding the board of
the PWBA OPTFDR (PL14.5.1) by hand.
Replacement
Replace the components in the reverse order of removal.
Replace the connector of the HARNESS ASSY FDR2T (grey) (PL14.5.3) and arrange the
harness as shown in the figure.
Chapter 3 Removal and Replacement Procedures
3-43
Advertisement
Table of Contents
Troubleshooting
