Notes On Using The Wiring Diagram Between Parts - Konica Minolta Magicolor 3300 Service Manual

2.2 Notes on Using the Wiring Diagram between Parts

The following describes the legend of the wiring diagrams between parts shown on the following pages.
Symbols
PWBA
OPTFDR
REGI CLUTCH
EXIT PAPER
7-156
Denotes a plug.
Denotes a jack.
P/J
XX
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
YY
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Chapter 5.
Parts List.
Heater
Denotes functional parts attached with functional parts name.
Control
Denotes the control and its outline in PWB.
DEVE_A Denotes a connection between parts with harnesses or wires,
attached with signal name/contents.
Denotes the function, and logic value of the signal to operate the
function (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes the function, and logic value of the signal when the
function operated (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Description